如果您对该产品感兴趣的话,可以
产品名称: Needle Flame Tester
产品型号: AN6110
产品展商: SHENZHEN ANGUI OF CHINA
产品文档: 无相关文档
简单介绍
Needle Flame Tester is designed according to the standards requirements of IEC 60695-11-5.
Needle flame tester Detail
Needle Flame Tester
的详细介绍
When the products under the condition of failure, such as the fault current which flow through the leak path, the components or parts are overheating, and not well contact circumstances are likely to cause fire, it will spread to the other parts nearby,Needle flame test simulate the small flame which produce by the test sample under the failure conditions,using the technical to evalsuate the catch fire danger. When the test sample can’t test by the Glow-wire tester or Horizontal-vertical flame chamber tester, it can use the Needle flame tester to test it. If the test samples catch fire during the glow-wire test,the dangerous situation which arise by the burning test also need to use the needle flame tester to test. Needle flame test apply to electrical and electronic products, home appliances components,parts and components,parts and components, such as:wiring boards,centrifugal switch, rice cooker socket.
Characteristics
Needle flame tester is composed by the test part and control part, using the integrated design, to facilitate the installation at the scene and debug. The shell of the test chamber and the important components are all manufactured by stainless steel, resistant cigarettes and gas corrosion: The automatic degree of control system is high, has automatic ignition function, temperature and time figures show, so that the observation and records are facilitate and the use of it is stable and reliable.
Detailed parameter:
Gas
|
95% Butagas ( Standard Gas ) ,Available Propane Gas
|
Grads of Flame Temperature
|
100℃ ± 2℃ ~ 700℃ ± 3℃ ( Room Temperature ~ 999℃ ) , 23.5s±1.0s(1s ~ 999.9s)
|
Flame High
|
12mm ± 1mm (Adjustable )
|
Burner Angle
|
Vertical/Tilt Adjustment ( 90°Adjust and Measure Flame High Time ) (45°Experiment Time )
|
Needle Burner
|
Stainless Steel, Diameter of boreΦ 0.5mm ± 0.1mm ,Outside Diameter ≤Φ 0.9mm ,Long ≥ 35mm
|
Test Room
|
≥ 0.5m 3 ,Black background sensor
|
Temperature Sensor
|
K Type Φ 0.5mm Armored imports thermocouple 1100℃
|
Dimensions
|
(W X D X H) 1120mm × 520mm × 1250mm ,Air hole Φ 100mm ;
|
Power Supply
|
220V 0.5kVA
|
E-mial:szan@xzzh88.com